RC12 heavy duty windlasses
Heavy duty Rope/Chain Series
- The RC12HD is designed for use with 10 to 13mm (⅜” to ½”) short link chain combined with 16 to 22mm (⅝” to 7/8”) nylon rope
- Classification Society approval available for specific cases, contact your Maxwell representative
- This design is particularly well suited to light duty commercial vessels requiring high service speeds, eg patrol vessels, as the reduced weight of the rope/chain combination removes weight from the bow
- The 38mm (1½”) main shaft is manufactured in high strength corrosion resistant 2205 Duplex stainless steel (AISI 316) and the above deck components in
AISI 316 stainless steel, providing excellent corrosion resistance and highly polished finish
- The RC12HD is available with either a heavy duty fan-cooled 24VDC, 48VDC, 3 phase AC hydraulic motors of various displacements or a single phase AC motor (contact your distributor for specifications and application). Run time and continuous pull varies between versions (see specifications)
- Double cone-type brake/clutch mechanism permits ‘Free-Fall’ anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement, ensuring safe and precise operator control
- The RC12HD features Maxwell’s revolutionary, patented Wave Design™ chainwheel
P104975
The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
P104974
The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
P104973
The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
P104972
The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
P104971
The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
P104970
The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
P104969
The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
P104968
The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.