Accessories
WCAPSET
Water lubrication either by means of tapping a small amount of water from the main engine’s raw water cooling circuit or a G water scoop (kit optional).
VTF1
Transmission oil, suitable for all marine transmissions where Automatic Transmission Fluid (ATF) Dextron IID or Suffix A is specified.
SN25B
Spare zinc anode for 25mm diameter shaft nut assembly
SA35/3000
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA35/2500
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA35/2000
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA302500A
SA302000A
SA30/3000
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA30/2500
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA30/2000
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA30/1500
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA25/3000
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA25/2500
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA25/2000
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
SA25/1500
One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.