Cooling Water Hoses
Type MWHOSE is made of EPDM rubber with synthetic fabric and spiraled steel reinforcement. The hose is suitable for cooling water, both suction and pressure
(max. 2.5 bar), salt and fresh water. It is temperature-resistant between -30° and +120°C.
Unlike lower-quality unreinforced hoses, MWHOSE will not kink or fold shut, thereby preventing a major cause of low seawater flow to the boat engine cooling system and consequent damage to the impeller and the exhaust system. Similar benefits accrue from the use of this hose for cockpit drains and other critical water connections.
MWHOSE51
High-quality cooling water inlet hose for professional installations, 51mm inside diameter.
MWHOSE38
High-quality cooling water inlet hose for professional installations, 38mm inside diameter.
MWHOSE32
High-quality cooling water inlet hose for professional installations, 32mm inside diameter.
MWHOSE25
High-quality cooling water inlet hose for professional installations, 25mm inside diameter.
MWHOSE19
High-quality cooling water inlet hose for professional installations,19mm inside diameter.