Bronze stern tube with mounting flange and one bearing aft, length 1100mm, diameter 30mm.
SKU: BL30/1100
The rear of tube BL30/1100 has an outer cutlass bearing and a mounting flange. Slots in the tube are designed for easy replacement of the cutlass bearing. Water-lubricated stern gear for GRP or wooden vessels.
Description
A bronze stern tube with mounting flange and one cutlass bearing aft. The slots in the tube are designed for easy replacement of the bearing, and it is suitable for a 30mm diameter shaft.
A propeller nut with integrated zinc anode comes as standard with the propeller shaft. (option)
There are two options for water-lubrication of the shaft assemblies:
1. By means of a G?8” water scoop with ball valve, hose pillar, 1m of water hose and hose clamps (optional kit: WCAPS).
A propeller nut with integrated zinc anode comes as standard with the propeller shaft. (option)
There are two options for water-lubrication of the shaft assemblies:
1. By means of a G?8” water scoop with ball valve, hose pillar, 1m of water hose and hose clamps (optional kit: WCAPS).
2. By tapping a small amount of water from the main engine’s raw water-cooling circuit.
For the second option we offer the ZWBKIT. With this kit you have all you need to water-lubricate your shaft assembly by using water from the main engine’s raw water-cooling circuit. The kit consists of a T-piece(18-10-18mm), 3m of 10mm diameter hose (DWHOSE10A) and four hose clampsSpecifications
| Length (mm) | 1100 |
| Shaft diameter (inches) | 1 3/16 |
| Material | Bronze |
| Shaft diameter (mm) | 30 |
| Product code | BL30/1100 |
| Length (inches) | 43 5/16 |